Power Unit Communication Error, Try Again or Cycle Power.

Symptom

Error message

IN2K: 20044 POWER UNIT PRD ERROR 4246 20044 POWER UNIT PRD ERROR DO ECM 0 0 HWStatus=00F4 User=0000 0000 4246 XRTitan.cpp 810 The ECM received a PRD error from the power unit after the PU Reset line had been asserted. During the recovery sequence, power unit communications are halted,errors 422DH and 4260H will usually be encountered if the prep/expose switch is pressed during the recovery sequence.

IN2K: 30015 POWER UNIT : MA SENSE DOES NOT AGREE WITH SELECTION 42C0 30015 POWER UNIT : MA SENSE DOES NOT AGREE WITH SELECTION AR ECM 0 0 HWStatus=0010 User=0000 0000 42C0 XRTitan.cpp 810 139 This error is generated when the generator does not measure mA during an exposure

Applies to

Models

Innova, Advantx

Product

Innova 2000 Innova 2000 systems Innova 2000 systems Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems Advantx E Biplane Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx, LFX Advantx product line LFX Advantx product line

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.