GE Healthcare · MRExcite22255362249148

Cannot Scan With intermittent TR and Dynamic Disable Faults.

Symptom

Cannot Scan With intermittent TR and Dynamic Disable Faults. The customer when scanning is getting intermittent TR and Dynamic Disable faults. It happens with all coils and cannot be pinned down to a specific PSD.

Error message

2225536 Dynamic disable and T/R driver board error. A spurious dynamic disable fault occurred. See Long Description Error: 2225536 Suite: MRS1 Host: OC0 Proc: HPC_PORT_ID PMH.m 1.29 Method: spi_tr_mon Line: 6220 Dynamic disable and T/R driver board error. A spurious dynamic disable fault occurred. It cleared itself before the specific problem could be read. Possible causes: noise on the dynamic disable board or a bad board.

2249148 Dynamic disable and T/R driver board error. A spurious T/R or inductive drive fault occurred See Long Description 2249148 ERROR: EM_HC_TR_MON_REG_2_FLT Dynamic disable and T/R driver board error. A spurious T/R or inductive drive fault occurred. It cleared itself before the specific problem could be read. Possible causes: noise onthe dynamic disable board or a bad board.

Applies to

Models
Excite
Product
Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
Software
11.0 Only for 1.5T Excite product. 12.0 is Excite HD and 14.0 is Excite HDx. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
Component
2225545-6 USAI PREMIER 7000 PHASED ARRAY CTL SPINE COIL. M1087SP No special tuning is required after replacing the Adapter Block 2225545-9 of the M1087SP USAI PREMIER 7000 PHASED ARRAY CTL SPINE COIL 2225545-6.
Area
MR

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare MR issues