No gantry motion is reported by the customer.

Symptom

Error message

INX100: 1050142 Anti-Cinematic Error 4B10 HW 0000 USER = 4000 - This error is due to big variation detected on Positioner Position values. It can be due to a shortcut on cable, or a bad potentiometer or encoder. 1050142 Anti-Cinematic Error 4B10 HW 0000 USER = 4000 - This error is due to big variation detected on Positioner Position values. It can be due to a shortcut on cable, or a bad potentiometer or encoder. HW code 0x0000 = Larm Axis User code 4000 = Position Problem

INX100: Lift MCB PRD Code ACH - EXT Brkp Brake voltage Failure (PRD: AC) Lift MCB PRD Code ACH - EXT Brkp Brake voltage Failure. All Other MCB's held in PRD fault - LARM = BD; Pivot = BD, Arc = AD and Lift = AC; Troubleshooting - Troubleshoot the Axis with the Lowest PRD failure.

INX100: 1050145 Anti-Cinematic Error 4B10 HW 0003 User = 8000 -This error is due to big variation detected on Positioner Position values. It can be due to a shortcut on cable, or a bad potentiometer or encoder. 1050145 Anti-Cinematic Error 4B10 HW 0003 User = 8000 -This error is due to big variation detected on Positioner Position values. It can be due to a shortcut on cable, or a bad potentiometer or encoder. HW 0003 = Lift Axis User 8

Applies to

Models

Innova

Product

Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.