GE Healthcare · X-ray VascularInnova50114
The table top will not drive in the longitudinal direction from the TSUI.
Symptom
The table top will not drive in the longitudinal direction from the TSUI. When using the Smart box or Smart handle to drive the longitudinal table top there is no motion. The table top will not drive in the longitudinal direction from the TSUI. When using the Smart box or Smart handle to drive the longitudinal table top there is no motion.
Error message
Innova 2000, Omega 5 Table Advantx Console Error 4ABF and SUIF Error 50114 when trying to move the table longitudinally Advantx Console Error 4ABF and SUIF Error 50114 when trying to move the table longitudinally
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.