GE Healthcare · MRExcite2248827
SRFD2 RF Amplifier Voltage Standing Wave Ratio (VSWR) Fault due to faulty body hybrid splitter.
Symptom
Will Not Scan With RF Errors Will not scan with RF errors
Error message
2248827 Analogic RF Amplifier 1 Voltage Standing Wave Ratio (VSWR) Fault 2248827 Host: HMRA-MR1 Process: NSP 2248827 Analogic RF Amplifier 1 Voltage Standing Wave Ratio (VSWR) Fault. Analogic RF Amp 1 reflected power exceeds 2250W. Possible causes: improper load, disconnected or defective output cable from RF Amp 1 to RF Interface (RFI), defective RFI or RF Amp 1. Extended Error: Connect RF Power Measurement Kit attenuator load to failing head or body RFI output port and check for faults. In this configuration faults indicate cable or hardware problem inside cabinet. No faults indicate possible external load problem. File: SCP:../RfNbMdsHWO.cpp Line: 2218
Applies to
- Models
- Excite
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.0 Only for 1.5T Excite product. 12.0 is Excite HD and 14.0 is Excite HDx. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Component
- 46-321312G3 1.5T BODY T/R SWITCH AND HYBRID SPLITTER 46–321312G3 1.5T BODY T/R SWITCH AND HYBRID SPLITTER (Changes up to 2274266) 46–321312G3 1.5T BODY T/R SWITCH AND HYBRID SPLITTER (Changes up to 2274266)
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.