GE Healthcare · MR
Customer's chiller is operating outside of specifications.
Symptom
CX ALARM WATER TEMP HIGH. CX ALARM WATER TEMP HIGH, the Water Temp is higher than the high alarm limit setting on the SHeM.
Error message
CX ALARM WATER TEMP HIGH. CX ALARM WATER TEMP HIGH, the Water Temp is higher than the high alarm limit setting on the SHeM.
Applies to
- Product
- Magnet CX. Software Version Concept should NOT be selected for Magnet Products Conquest Cx1.0T(Pxxx) / 1.5T(Nxxx) Magnets LHe Boiloff Rate: < 0.18 liters/hr He Vessel Pressure: 0.25 to 0.5 psig F1 Flow: 1.8 to 2.2 SCFH F2 Flow: 0.8 to 1.2 SCFH 1st Stage: 32 to 60 Kelvin 2nd Stage: 7 to 17 Kelvin Min. Operating LHe Level: 42% Min. LHe Ramp Level: 90% Min. LHe Shim Level: 75% Helium Volume: 1940 Liters (1.5) Helium Volume: 1970 Liters (1.0) Burst Disk <": 2319285 Burst Disk >": 2350415 Burst Disk O-ring: 46-281101P1 Baffle Assy: 2133618 Shim Lead Large 5/8: 2148084
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.