GE Healthcare · X-ray VascularInnovaAdvantx60046
The Gantry continues to move for a short distance after smart handle is released.
Symptom
LC: The Gantry continues to move for a short distance after smart handle is released.
Error message
error Code = 60046, error Text = POS : SMART HANDLE CONTROL PROBLEM. CHECK IT OR CALL SERVICE, debug Text += pos-error=4B07, recovery Class = WR, major Function /= LC Gantry System impact: Permanent enable. Displayed message : "Smart handle problem. Please call service.".
Applies to
- Models
- Innova, Advantx
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.