GE Healthcare · X-ray VascularInnova50018
Gantry moving slow due to Positioner XRAY TUBE collision Sensor errors.
Symptom
Gantry moving slow due to Positioner XRAY TUBE collision Sensor errors. Collimator Collision Sensor Gantry moving slow due to Positioner XRAY Tube Faceplate collision errors. Collimator Collision Sensor. This is a collison on the XRAY tube side. Usually indicated by HW code 0010 in the debug text of the error log.
Error message
4AC3 50018 Gantry moves slow. Errors 4AC3 on Advantx Console and Errors 50018 in the SUIF are generated when trying to move the table top in the longitudinal direction. It will stop on it;s own and the locks will come on, insicating a Pot/Encoder failure. Cerfogli Gantry moves slow. Errors 4AC3 on Advantx Console and Errors 50018 in the SUIF are generated when trying to move the table top in the longitudinal direction. It will stop on it;s own and the locks will come on, insicating a Pot/Encoder failure.
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.