GE Healthcare · MR22367053958427977357522421882236700
Unable to Scan a Phantom With RF Errors.
Symptom
Unable to Scan a Phantom With RF Errors
Error message
2236705 CERD Diags Analog receiver lowpass filter test failure Sun May 18 23:20:07 2008 2236705 2 oc001 diags diagsMain.m 1855 CERD Diags : Analog receiver lowpass filter test failure Receiver channel 1 has poor frequency response (fixed antialias filter). FFT Mag: 39584, Min.Allowed: 27977, Max.Allowed: 35752, Freq.Hz: 242188 EN 301 2236700 CERD Diags Analog receiver gain test failure Sun May 18 23:20:07 2008 2236700 2 oc001 diags diagsMain.m 1855 CERD Diags : Analog receiver gain test failure Receiver channel 3 has an out-of-range amplitude (possible gain error). Amplitude: 19, Min.Allowed: 10482, Max.Allowed: 30934, RHO mult: 32767 EN 289 SR 286 2236698 CERD Diags Analog Receiver Channel Present LO Test Failure. Receiver channel 1 is missing LO1 or LO2 per RF Receiver Status register. Error: 2236698 File: diagsMain.m Line: 2039 CERD Diags : Analog Receiver Channel Present LO Test Failure Receiver channel 1 is missing LO1 or LO2 per RF Receiver Status register. Check receiver module installation. Error: 2236698 File: diagsMain.m Line: 2039 CERD Diags : Analog Receiver Channel Present LO Test Failure. Receiver channel 1 is missing LO1 or LO2 per RF Receiver Status register. Chec
Applies to
- Product
- Profile High SR External AXI host CPU with AN8290Y gradients
- Software
- 7.8x Profile4 or ProfileHSR only
- Component
- 2206100 LX UCERD Receiver Same part number is used for Profile4 UCERD receiver.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Diagnostics fail with 2236700 out-of-range amplitude Due to Receiver.
- RF Monitoring error due to CTLU Assembly.
- Intermittent Ghosting or Smearing of Images
- Images flat unable to window/level
- Unable to Scan Diffusion Weighted EPI Due to Poor Seating of CERD Receiver # 1.
- Image artifacts, Autoprescan values are the same tg very high, images are washed out.