GE Healthcare · MRSigna2234216223670422367032236705
Images flat unable to window/level
Symptom
Unable to adjust Window or Level on Images. Images are flat, no contrast adjustment. Receiver is failing diagnostics.
Error message
2234216 A/D Offsets calculated during CERD Calibration is out of valid range. Fri Jan 30 16:21:10 1998 Error: 2234216 Host: oc001 Process: NSP File: TPS:rap_AD_offset Line: 942 A/D Offsets calculated during CERD Calibration is out of valid range The calculated value is 235, valid range is [127,-128] (rcvr#=0) Suspect analog receiver problem, please run CERD Diagnostics! 2236704 Analog Receiver Select Test Failure 2236704 File: diagsMain.m Line: 2039 CERD Diags : Analog Receiver Select Test Failure Receiver channel 4 has an out-of-range amplitude (R1 is unique per channel). Amplitude: 167, Min.Allowed: 2615, Max.Allowed: 4734, R1 dB: 18 2236703 Analog Receiver Attenuation Test Failure 2236703 File: diagsMain.m Line: 2039 CERD Diags : Analog Receiver Attenuation Test Failure Receiver channel 4 has an out-of-range amplitude for an R1 attenuation. Amplitude: 846, Min.Allowed: 897, Max.Allowed: 1036, R1 dB: 3 2236705 Cerd Rcvr Diags failure - Analog rcv Anti Alias Filter Test Failure Cerd rcv diags fail Proc diags Error 2236705 Analog rcv anti alias filter test failure Rcv channel X has poor freq response. Cerd rcv diags fail Error 2236705 Analog rcv anti alias filter test failure Rc
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2206100 LX UCERD Receiver Same part number is used for Profile4 UCERD receiver.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.