GE Healthcare · X-ray VascularInnova1200105
Innova System boot failure Any defect that prevents from getting the first acquisition after the system reset.
Innova System boot failure
Symptom
Innova System boot failure Any defect that prevents from getting the first acquisition after the system reset. Customer needs to boot again to recover. When Innova system has a actor issue.
Error message
error Code = 1200105, error Text = Err_Detector Temperature, debug Text += Temperature out of range XX.XX degrees, recovery Class = WR, major Function /= XRImDet System impact: Message displayed to the customer. Displayed message : "Detector out of temperature range. If problem persists, call Service". See long description for further details. System impact: Message displayed to the customer. Displayed message : "Detector out of temperature range. If problem persists, call Service". Two cases can occur; either temperature above USL (Upper spec limit) or temperature below LSL (lower spec limit). Currently : USL = 35° C, LSL = 25° C. If measured detector temperature is outside this range, then an error 1200105 is generated.
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.