SMA: OVER CURRENT ERROR:Innova X100 Monoplane:Work with Hospital staff to correct technical room environmental issue.
Symptom
50110 POS : SMA: OVER CURRENT ERROR 50110 POS : SMA: OVER CURRENT ERROR. SMA overcurrent is result of rapid changes in direction when driven. Common on Innova 2000 gantry. When the user does several rapid direction changes from the smart handle the system will log an overcurrent event. No system degradation. 50110 POS : SMA: OVER CURRENT ERROR SMA overcurrent is result of rapid changes in direction when driven. Common on Innova 2000 gantry. When the user does several rapid direction changes from the smart handle the system will log an overcurrent event. No system degradation.
Error message
50110 POS : CARC OVER CURRENT ERROR 4ABB HDW 0002 USR = 0200 50110 POS SMA: Over current error DO LC Gantry (null) Component(s) Positioner SMA Mechanical 1 0 POS ERROR=4ABB,HDW STATUS=0002,USR STATUS=0200 XRPAtlasLogger.cpp 4ABB HW 0002 User 0200 => Frontal arc overcurrent Note : HW error / Axis relationship 0x0000 HW_FRT_L 0x0001 HW_FRT_PVT 0x0002 HW_FRT_ARC 0x0003 HW_FRT_II User error signification 0x0100 US_AXIS_HARD_OVER_CURRENT 0x0200 US_AXIS_FAST_OVER_CURRENT 0x0400 US_AXIS_SLOW_OVER_CURRENT
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova 2000 Innova 2000 systems Innova 2000 systems Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.