GE Healthcare · MR2224666
Auto Prescan Fails in Body Transmit Mode With TG Reached the High Limit due to HFO Bottom RF Body Coil Assembly.
Symptom
Auto Prescan Fails with TG Reached the High Limit See error in Long Description 2224589 File: PMH.m 1.29 Method: ps_send_ta Line: 50 TG reached the high limit. Check patient positioning and verify the patient is not touching the transmit coil. Try Auto Prescan again or use Manual Prescan.
Error message
2224666 Auto Prescan failed, TG reached the high limit. Wed May 5 09:28:17 2004 Error: 2224666 Host: hpo1 Process: psc File: PscMainControl.cc Line: 1296 Auto Prescan failed, TG reached the high limit. Check patient positioning and verify the patient is not touching the transmit coil. Try Auto Prescan again or use Manual Prescan.
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Component
- 2269627 HFO Bottom RF Body Coil
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100513. Will Not Scan with Gradient Errors.
- Multicoil Bias Fault errors on multiple coils.
- Auto Prescan Failures and RF amp setup incomplete Errors Due to Defective RF amp.
- The system is unable to scan with any surface coil, get dynamic disable faults.
- Getting intermittent SCIM and Keyboard Errors.
- Auto prescan for Runoff Scan fails Due to 3T Body Pre Amp Combiner Module. 3T Excite HD 12.0. 2224666 Auto Prescan failed, Auto Prescan failed, possible data acquisition failure.