GE Healthcare · X-ray VascularInnova281002700128028100322800007
Cannot delete a patient on Innova system
Symptom
Cannot delete a patient on Innova system
Error message
2810027 A possible hardware error has been detected by the IP disks chain 2810027 A possible hardware error has been detected by the IP disks chain, Wait of transfer completion timeout (333.001280 >= 333 ms) Followed by: 2810032 IP disk read review error and 2800007 Review of a sequence is unavailable, due to data inconsistency 2810027 A possible hardware error has been detected by the IP disks chain, Wait of transfer completion timeout (333.001280 >= 333 ms) Followed by: 2810032 IP disk read review error and 2800007 Review of a sequence is unavailable, due to data inconsistency. Check and repair failed to run, could not delete any patients.
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.