The Advatnx Console displays "Touch Reset to Continue".
Symptom
ADX: The Advatnx Console displays "Touch Reset to Continue". The Operator must touch the reset button to clear the error. The error 600E may be displayed on subsequent resets, or reboots. The Advantx Console displays "Touch Reset to Continue". The Operator must touch the reset button to clear the error. The error 600E may be displayed on subsequent resets, or reboots. This error occurs when overcurrent is sensed by the power unit (mA overload occurred), and there was less than 10 minutes since the previous mA overload. (If last mA overload happened more than 10 minutes before this one, error 42D9 is generated.)
Error message
ADX 30050 POWER UNIT : THYRISTOR TQ FAILURE 42DA 30040 OVERCURRENT SENSED. TOUCH RESET TO CONTINUE. AR ECM 0 0 HWStatus=0000 User=0000 0000 42DA XRTitan.cpp 810
Applies to
- Models
- Advantx, Innova
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems
- Software
- All AdvantxE Software releases All AdvantxE Software releases All Advantx E Software releases
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.