GE Healthcare · MR
OrthoMRI Unknown coil error on muliple coils.OrthoMRI Automatic Coil ID Fails.OrthoMRI Turn Off the Automatic Coil Ident…
OrthoMRI Unknown coil error on muliple coils.OrthoMRI Automatic Coil ID Fails.OrthoMRI Turn Off the Automatic Coil Identification.OrthoMRI Escan XQ.OrthoMRI Unknown Coil Error
Symptom
OrthoMRI Automatic Coil ID Fails. Ortho MRI The customer cannot scan because the coil the type of coil being used is not recognized by the system. OrthoMRI The customer cannot scan because the coil the type of coil being used is not recognized by the system.
Error message
OrthoMRI Unknown Coil Error The system does not recognize the coil that is plugged in for use. The high failure part is the coil cable. If this error occurs on more than one coil, the mechanical swing arm cables is the next high failure part.
Applies to
- Product
- OrthoMRI Escan XQ EscanXQ and EscanNE
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Component
- OrthoMRI LNR9101821001 Moving mechanism swing arm with cables
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.