GE Healthcare · X-ray VascularInnova1050252
The image monitor is displaying the message Gantry Table commands disabled, Use Smart Box/Handle to enable
Symptom
INX100: Gantry, Table commands disabled, Use Smart Box/Handle to enable The DL monitor is displaying the message Gantry Table commands disabled, Use Smart Box/Handle to enable The image monitor is displaying the message "Gantry Table commands disabled, Use Smart Box/Handle to enable"
Error message
error Code = 1050252, error Text = POSITIONER LOCKED, debug Text = - lock button pressed on SH/SB, recovery Class = WR, major Function /= GantryAxis System impact: Gantry/table lock-up. Displayed message : "Gantry/Table commands disabled. Use Smart Box/Handle to enable.".
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.