Innova System Boot Failure, all monitors are blank on the Digital Leader.
Symptom
Innova System Boot Failure, all monitors are blank on the Digital Leader. The DL VGA monitor has a blinking light indicating no video. Power to monitors OK LED indicator on, but no display on DL flat panel, no image is present on the in room monitors. The system appears to not "turn on" for the customer Innova System Boot Failure, all monitors are blank on the Digital Leader. The DL VGA monitor has a blinking light indicating no video. Power to monitors OK LED indicator on, but no display on DL flat panel, no image is present on the in room monitors. The system appears to not "turn on" for the customer Innova System Boot Failure or all monitors are blank. DL did not boot. Sometimes on a second reset or boot the DL boots ok.
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- Digital Leader DL8 DIVA XEON BOOTABLE CHASSIS DL8 DIVA XEON BOOTABLE CHASSIS 5265684 DL8 DIVA XEON BOOTABLE CHASSIS 5265684 DL7 bootable chassis 5176826 DL7 bootable chassis 5176826 DL 7 bootable chassis 5176826
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.