ID102359 Collimator error.
Symptom
Collimator error. Call Service is displayed on the Innova Monitor. You may see. 600200 IH XRBeamForm Front: Collimator rectangular blades autocalibration failed Debug: Error or timeout on collimator rectangular blades recalibration after several retries [00000102-00000002-00000003-00000100] AND: 600400 IH XRBeamForm Front: Collimator spectral filter autocalibration failed Debug: Collimator Failure during spectral filter init [00000104-00000004-00000003-00000100] Collimator error. Call Service is displayed on the Innova Monitor. You have 600200 IH XRBeamForm Front: Collimator rectangular blades autocalibration failed Debug: Error or timeout on collimator rectangular blades recalibration after several retries [00000102-00000002-00000003-00000100] AND: 600400 IH XRBeamForm Front: Collimator spectral filter autocalibration failed Debug: Collimator Failure during spectral filter init [00000104-00000004-00000003-00000100]
Error message
600400, error Text = Collimator spectral filter autocalibration failed, debug Text += Collimator Failure during spectral filter init, recovery Class = IH, major Function /= XRBeamForm System impact: No more X-ray. Displayed message : "Collimator error. Call Service.".
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Innova Collimator Innova collimator Innova collimator
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.