GE Healthcare · MR
OrthoMRI Coil is still loose after closing locking handle.OrthoMRI Knee coil still moves after being locked down.OrthoMR…
OrthoMRI Coil is still loose after closing locking handle.OrthoMRI Knee coil still moves after being locked down.OrthoMRI Insert Plastic Disks into the Base of the Coil.OrthoMRI Escan (Unix Digital)
Symptom
OrthoMRI Knee coil still moves after being locked down
Applies to
- Product
- OrthoMRI Escan (Unix Digital) Two easy ways to tell if the Escan Unix system is analog or digital. First, the analog service password is coil and the digital password is probe. Second, the analog daily QA phantom is a bottle where as the digital daily QA phantom is a large spherical ball.
- Software
- OrthoMRI Unix 2.x
- Component
- OrthoMRI LNR8106419000 Plastic disk for receive coils Order at least 6 disks. Sometimes it takes more than one to finish the repair.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.