GE Healthcare · MRExcite2254250
2254250 MKS error code 35, 50V Power Supply Low.
Symptom
Unable to Scan with 3T MKS RF Amplifier will Not go Ready MKS amp powers up but will not come ready.
Error message
2254250 - 3T RF Amplifier 50 Volt Supply Low (fault 35). The SSD 50 Volt supply was below 5% specification. See Long Description for extended error message. 2254250 3T RF Amplifier 50 Volt Supply Low (fault 35). The SSD 50 Volt supply was below 5% specification. Possible Causes: Defective supply or short on supply output. If the fault persists, replace the RF amplifier. Extended Error: The RF Amp 50 V Power Supply has low voltage. Check fuses F15, F16 and F17, replace if necessary. If the fuses are functional, replace the power supply deck.
Applies to
- Models
- Excite
- Product
- 3T Excite HD 12.0 software only
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Component
- SecondOpinion MKS 3T 35kW RF Amp 5104896 See comments in resolution concept for second opinion requirements before ordering this part.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.