Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
Symptom
Xray aborted, stopped- Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor. Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor. This is any defect in a vascular system that prevents it from making X-rays for at least one request (Fluoro or Record). Sometimes, a reset system may be needed to recover X-rays (case IH error follows abort error). Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor This is caused by any defect in a vascular system that prevents it from making X-rays for at least one request (Fluoro or Record). Sometimes, a reset system may be needed to recover X-rays (case IH error follows abort error). errors: 600104 IN2K: Error 4F76
Error message
IN2K: 1800007 AR XRExpSens ERR_FUNCTIONAL ExpsensDetectorBeamCoverageProperty Check 1800007 AR XRExpSens ERR_FUNCTIONAL Debug: [ExpsensDetectorBeamCoverageProperty::PropertyCheck] Inconsistent area value -1310 ! 1800009 DO XRExpSens ERR_APPSETUP PropertyCheck failed for ExpsensDetectorBeamCoverageProperty 1800009 DO XRExpSens ERR_APPSETUP Debug: [AISProperty::Configure] PropertyCheck failed for ExpsensDetectorBeamCoverageProperty (RECTANGULAR ; In tenth of mm from center : V[0]=-32767 V[1]=-32767 V[2]=32767 V[3]=32767 V[4]=0 V[5]=0 V[6]=0 V[7]=0 U[0]=-32767 U[1]=32767 U[2]=32767 U[3]=-32767 U[4]=
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.