GE Healthcare · X-ray Vascular
IVUS/S5: IVUS does not boot up.
IVUS does not boot up.
Symptom
IVUS/S5: IVUS does not boot up. It makes several beeps when trying to power up IVUS does not boot up. It makes several beeps when trying to power up.
Error message
IVUS Beeps 7 beeps and then one long beep or 8 beeps. No Video Display. IVUS Beeps 7 beeps and then one long beep or 8 beeps. No video Display. 7 beeps and one long beep or 8 beeps indicate the same system error. Both indicate the Video Adaptor is missing or has faulty RAM Memroy Sticks.
Applies to
- Product
- IVUS S5I IVUS S5I IVUS S5I
- Component
- IVUS - IVUS S5i IVUS - IVUS S5i IVUS - IVUS S5i IVUS DVD drive 5179667 IVUS S5i Patient Interface Module (PIM), part # 5179458, Valid as of 3/23/09 IVUS 1 Gigabyte Memory Module. Part # 5180495 Two Sticks come in this kit
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.