INX1X1 – Innova 3DCT acquisitions are not allowed. “System is not calibrated for 3D” is displayed on the monitor.:Innova…
INX1X1 – Innova 3DCT acquisitions are not allowed. “System is not calibrated for 3D” is displayed on the monitor.:Innova 3131:INX1X1: 810028 Front: System is not calibrated for 3D
Symptom
INX100: 3DCT acquisitions are not allowed. System is not calibrated for 3D. Call Service to perform 3D calibration is displayed on the monitor. Innova 3DCT acquisitions are not allowed. Image display error = System is not calibrated for 3D. Call Service to perform 3D calibration. (Error 810028) This Message will appear any time the 3D calibration is expired, or the system detects the 3D calibration is corrupt.
Error message
INX100: 810028 System is not calibrated for 3D :Debug Text: ERROR: Failed to read expected information from the 3D calibration file. Error: 810028 Error Text: Front: System is not calibrated for 3D : never calibrated or corrupted calibration files. Debug Text: ERROR: Failed to read expected information from the 3D calibration file. See LD for full Error details. 810028 System is not calibrated for 3D :Debug Text: ERROR: Failed to read expected information from the 3D calibration file . Error Code: 810028 Subsystem: DL Error Text: Front: System is not calibrated for 3D : never calibrated or corrupted calibration files. Recovery Class: IH (InHibit) Debug Text: ERROR: Failed to read expected information from the 3D calibration file. Image display error: System is not calibrated for 3D. Call Service to perform 3D calibration. The error display and debug text for this error is different in this version of software (SPAD and Harmony programs) that it was in previous software (Unity program)…
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Software
- Innova Biplane SPAD_M3 Innova Biplane SPAD_M3 Innova Biplane SPAD_M3
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.