Innova: Positioner error.
Positioner error.
Symptom
Innova: Positioner error. Reset system. If problem persists, call Service. X-Ray is inhibited, Lost All Gantry axis's drive or NO movements. Omega table elevation will not drive down. Positioner error. Reset system. If problem persists, call Service. X-Ray is inhibited Positioner error. Reset system. If problem persists, call Service. X-Ray is inhibited, Lost All Gantry axis's drive or NO movements. Omega table elevation will not drive down. Lift failure, dose is minimized, call service
Error message
50120 PIB: ENABLE, HARDSTOP, BUMPER OR PRD 50120 "POS : PIB: ENABLE, HARDSTOP, BUMPER OR PRD ERROR " See for HW code 50120 "POS : PIB: ENABLE, HARDSTOP, BUMPER OR PRD ERROR " DO POS 0 0 HWStatus=0017 User=0000 0002 4AC5 XRTitan.cpp 50120: POS:PIB: ENABLE, HARDSTOP, BUMPER OR PRD ERROR: DO: HWStatus=0019 User=0000 0002 4AC5 INX100: 1050088 PIB INTERNAL WR GantryCPU No Boot PIB_INTERNAL 0 0 - RELAY_K12, open,Stuck 1050088 PIB INTERNAL WR GantryCPU No Boot PIB_INTERNAL 0 0 - RELAY_K12, Open or Stuck. The Pib has detected relay K12 is open or Stuck or monitoring error. 1050088 PIB INTERNAL WR GantryCPU No Boot PIB_INTERNAL 0 0 - RELAY_K12, open,Stuck, or monitoring error. 1050088 PIB INTERNAL WR GantryCPU No Boot PIB_INTERNAL 0 0 - RELAY_K12, Open or Stuck. The Pib has detected relay K12 is open or Stuck or monitoring error. Relay K12 is used for checking the emergency backout + Hardstop circuit of the lift. The test of this relay is Hardstop + emergency backout drive. INX100: 1050088 WR GantryCPU PIB INTERNAL Debug: - RELAY_K1, open INX100: 1050088 WR GantryCPU PIB INTERNAL Debug: - RELAY_K14, open 1050088 WR GantryCPU PIB INTERNAL Debug: - RELAY_K14, open. This error can be a perm
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.