Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
Symptom
Xray aborted, stopped- Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor. Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor. This is any defect in a vascular system that prevents it from making X-rays for at least one request (Fluoro or Record). Sometimes, a reset system may be needed to recover X-rays (case IH error follows abort error). Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor This is caused by any defect in a vascular system that prevents it from making X-rays for at least one request (Fluoro or Record). Sometimes, a reset system may be needed to recover X-rays (case IH error follows abort error). errors: 600104 IN2K: Error 4F76
Error message
error Code = 3602047, error Text = DC bus out of range, debug Text += jedi-error=501h, DC bus out of range, recovery Class = IH, major Function /= XRTechMgr System impact: X-ray unavailable. Displayed message : "Xray not available - Reset system; if problem persists, call Service".
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- INX100: Jedi AC/DC 3ph Mid Power assy - FRU ref 2323150-2 INX100: Jedi AC/DC 3ph Mid Power assy - FRU ref 2323150-2. Follow job card DR0182 for FRU replacement. Always use the most appropriate documentation for your system. The following was taken from Direction 5160408-9-2EN Rev 1 and is provided for your reference from the Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ DVD documentation. To view the most recent appropriate and detailed documentation, click to go to MY WORKSHOP INX100: Jedi AC/DC 3ph Mid Power assy - FRU ref 2323150-2. Follow job card DR0182 for FRU replacement. Always use the most appropriate documentation for your system. The following was taken from Direction 5160408-9-2EN Rev 1 and is provided for your reference from the Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ DVD documentation. To view the most recent appropriate and detailed documentation, click to go to MY WORKSHOP
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.