ProcedureOverviewReplacement
Replace the top cover module
Replace the DryStar 5300's top cover module — the fourth of the six cover/access procedures in the "Covers" group, and the one with the longest prerequisite chain: it isn't reachable until the front, right side, and left side covers are already off.
Applies to
DryStar 5300 (Type 5365/100)
Personnel
Basic — three prior covers must already be off per their own referenced sub-procedures, then it's remove/replace 4 screws to swap the Top cover module; no adjustment or calibration involved
Steps
13 steps
Source
DD+DIS270.05E — Drystar 5300, Repair and Service: Replacement of Parts, §1.4 Top cover module, Chapter 3.5/11-12, Edition 1 Rev.7 (2005-08-05)
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| Top cover module | CM+343345.X | |
| Crosshead screwdriver | n/a in source |
Full step-by-step for Replace the top cover module
All 13 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Overview guides
Completing Installation: Customer Instruction and Settings Backup5 stepsReplace the air filter6 stepsReplace the front cover9 stepsReplace the left side cover0 stepsReplace the output tray cover17 stepsReplace the right side cover10 steps
View all DryStar 5300 guidesSource: DD+DIS270.05E — Drystar 5300, Repair and Service: Replacement of Parts, §1.4 Top cover module, Chapter 3.5/11-12, Edition 1 Rev.7 (2005-08-05). Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.