ProcedureOverviewReplacement
Replace the output tray cover
Replace the DryStar 5300's output tray cover — the fifth of the six cover/access procedures in the "Covers" group, and the one with the most prerequisites: it can't be reached until the Front cover, Left side cover, Right side cover, and the Main board have already been removed.
Applies to
DryStar 5300 (Type 5365/100)
Personnel
Basic to intermediate — the cover itself comes off with two screws (A)/(B), but reaching it requires three prior cover-removal procedures plus a Main board removal to already be done (see Applies to); reinstallation also requires correctly engaging the cover's two bracket legs onto their axes before the screws go back in. No adjustment or calibration is involved.
Steps
17 steps
Source
DD+DIS270.05E — Drystar 5300, Repair and Service: Replacement of Parts, §1.5 Output tray cover, Chapter 3.5/13-16, Edition 1 Rev.7 (2005-08-05)
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| Output tray cover | CM+343347.X | |
| Crosshead screwdriver | n/a in source |
Full step-by-step for Replace the output tray cover
All 17 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Overview guides
Completing Installation: Customer Instruction and Settings Backup5 stepsReplace the air filter6 stepsReplace the front cover9 stepsReplace the left side cover0 stepsReplace the right side cover10 stepsReplace the top cover module13 steps
View all DryStar 5300 guidesSource: DD+DIS270.05E — Drystar 5300, Repair and Service: Replacement of Parts, §1.5 Output tray cover, Chapter 3.5/13-16, Edition 1 Rev.7 (2005-08-05). Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.