Warning — recoverable conditionPower Supply

E1624 — Power supply subsystem is no longer redundant

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E1624 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E1624 indicates: Power supply subsystem is no longer redundant. The code originates in the Power Supply section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level warning (Warning — recoverable condition).

Reported action: If the last remaining power supply fails, the system will go down. See the Troubleshooting Power Supplies section (p.71) to replace the failed supply..

Listed as an LCD front-panel status/error code ('PS Redundancy', Table 2 LCD Status Messages, p.22).

Full troubleshooting for E1624

The complete diagnosis, cause tree, and step-by-step remedy for the Power Supply subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Power Supply codes

E1610No power available from the specified power supply — missing or faultyE1614No power available from the specified power supply — improperly installed or faultyE1618Power supply voltage is out of the acceptable range (predictive failure)E161CAC input power source for the specified power supply is unavailable or out of rangeE1620AC input power source for the specified power supply is unavailable or out of range10052Application error on the Eleva Workspot when the operating-software DVD is not removedE061ABeam1 X signal path errorE061BBeam2 X signal path error
Discuss E1624 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.