What is Philips CT error code E161C?

AC input power source for the specified power supply is unavailable or out of range. It is reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware) on Mobile Network Device (MND) Extended Storage Option CT systems. Severity: Alarm — hardware fault; subsystem: Power Supply.

What should a field engineer do about E161C?

Check the AC power source for the specified power supply. If the problem persists, see Troubleshooting Power Supplies (p.71).. Isolate the Power Supply subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Mobile Network Device (MND) Extended Storage Option.

Alarm — hardware faultPower Supply

E161C — AC input power source for the specified power supply is unavailable or out of range

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E161C means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E161C indicates: AC input power source for the specified power supply is unavailable or out of range. The code originates in the Power Supply section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level alarm (Alarm — hardware fault).

Reported action: Check the AC power source for the specified power supply. If the problem persists, see Troubleshooting Power Supplies (p.71)..

Listed as an LCD front-panel status/error code ('PS # Input Lost', Table 2 LCD Status Messages, p.22). '#' identifies the affected power supply.

Full troubleshooting for E161C

The complete diagnosis, cause tree, and step-by-step remedy for the Power Supply subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Power Supply codes

E1610No power available from the specified power supply — missing or faulty E1614No power available from the specified power supply — improperly installed or faulty E1618Power supply voltage is out of the acceptable range (predictive failure)E1620AC input power source for the specified power supply is unavailable or out of range E1624Power supply subsystem is no longer redundant 10052Application error on the Eleva Workspot when the operating-software DVD is not removed E061ABeam1 X signal path error E061BBeam2 X signal path error

Discuss E161C with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.