What should a field engineer do about HC11316?

Replace the film in the upper tray with a new film pack.. Isolate the Film Tray Module — Print-Disable Override subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the DryStar 5500 (Type 5364/100) / DryStar 5503 (Type 5364/300).

AlarmFilm Tray Module — Print-Disable Override

HC11316 — Upper tray print-disable overruled, Dmax limited

Q: What is Agfa CT error code HC11316?

Upper tray print-disable overruled, Dmax limited. It is reported by the Film Tray Module on DryStar 5500 (Type 5364/100) and DryStar 5503 (Type 5364/300) CT systems. Severity: Alarm; subsystem: Film Tray Module — Print-Disable Override.

Agfa CT error code, reported by the Film Tray Module.

What HC11316 means

On DryStar 5500 (Type 5364/100) and DryStar 5503 (Type 5364/300) CT systems, status code HC11316 indicates: Upper tray print-disable overruled, Dmax limited. The code originates in the Film Tray Module — Print-Disable Override section of the Film Tray Module. Severity level alarm (Alarm).

Reported action: Replace the film in the upper tray with a new film pack..

Raised on the Drystar 5500/5503 when the film identification code in the upper tray is unreadable or invalid but the tray's print-disable has been overruled, so printing continues from the upper tray with Dmax limited. The printer shows "up.tray film inv.:Dmax limited".

Full troubleshooting for HC11316

The complete diagnosis, cause tree, and step-by-step remedy for the Film Tray Module — Print-Disable Override subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Film Tray Module — Print-Disable Override codes

HC11317Lower tray print-disable overruled, Dmax limited HC11323Middle tray print-disable overruled, Dmax limited HC10053Themis board CPU too hot HC10100MEC PCB test failed HC10814Drum passed sensor S24 not connected or malfunctioning HC10815Drum entry sensor S23 not connected or malfunctioning HC11000Firewire cable between Crius and Themis boards not connected or faulty HC1100124V actuator power not available on the MEC board

Discuss HC11316 with other field engineers in the FSELIB forum

Source: AGFA DryStar service manual — HC error catalogue (FSELIB authored corpus). Reference information re-authored by FSELIB — not a copy of the OEM manual.