What is Agfa CT error code HC11106?

Thermal head fan or cooling not OK. It is reported by the TH Module — Heater & Cooling Fan on DryStar 5500 (Type 5364/100) and DryStar 5503 (Type 5364/300) CT systems. Severity: Alarm; subsystem: TH Module — Heater & Cooling Fan.

What should a field engineer do about HC11106?

The appendix documents no dedicated Reason or Cure for this code — the only documented path forward is the printer's generic HC-code response procedure: Service menu, Test & Diagnose functions covering the thermal head and its interface board (THIB).. Isolate the TH Module — Heater & Cooling Fan subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the DryStar 5500 (Type 5364/100) / DryStar 5503 (Type 5364/300).

AlarmTH Module — Heater & Cooling Fan

HC11106 — Thermal head fan or cooling not OK

Agfa CT error code, reported by the TH Module — Heater & Cooling Fan.

What HC11106 means

On DryStar 5500 (Type 5364/100) and DryStar 5503 (Type 5364/300) CT systems, status code HC11106 indicates: Thermal head fan or cooling not OK. The code originates in the TH Module — Heater & Cooling Fan section of the TH Module — Heater & Cooling Fan. Severity level alarm (Alarm).

Reported action: The appendix documents no dedicated Reason or Cure for this code — the only documented path forward is the printer's generic HC-code response procedure: Service menu, Test & Diagnose functions covering the thermal head and its interface board (THIB)..

Raised on the Drystar 5500/5503 when the thermal head fan or cooling is not OK, shown on the local display as "Thermal head fan or cooling not OK". One of the catalogue's stub codes — the source gives the local display message but no Reason, Cure or Part.

Full troubleshooting for HC11106

The complete diagnosis, cause tree, and step-by-step remedy for the TH Module — Heater & Cooling Fan subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related TH Module — Heater & Cooling Fan codes

HC10912Thermal head heater not connected or malfunctioning HC10913Thermal printhead cooling fan F1 not connected or malfunctioning HC10053Themis board CPU too hot HC10100MEC PCB test failed HC10814Drum passed sensor S24 not connected or malfunctioning HC10815Drum entry sensor S23 not connected or malfunctioning HC11000Firewire cable between Crius and Themis boards not connected or faulty HC1100124V actuator power not available on the MEC board

Discuss HC11106 with other field engineers in the FSELIB forum

Source: AGFA DryStar service manual — HC error catalogue (FSELIB authored corpus). Reference information re-authored by FSELIB — not a copy of the OEM manual.