GE Healthcare · MRSigna
Cradle Will Not Advance With Patient Loaded due to Cradle Connection Pins Loose and Sticking Out.
Symptom
Cradle Will Not Advance with Cradle Obstructed. Moves Okay Without Patient With a patient on the table, not a heavy one, the table will not move in and out, and the system returns a message "Cradle obstructed". There is no unusual noise heard. But with no patient on the table, it moves in and out fine. The customer tried cycling RF/Pen cabinet power but this was no help.
Error message
The Cradle is Obstructed This is a popup error message that the operator sees when the cradle is commanded to move and the system does not sense the movement. (The system counts encoder pulses per unit of time and will fail if none or too few pulses are seen). The error message is not logged in the message log.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.