GE Healthcare · MRSigna
Coil ID Connector on the Cradle Faceplate must be Replaced.
Symptom
Coil ID Connector on the Cradle Faceplate must be Replaced Coil ID is no longer recognized on all coils. The connector is damaged and must be replaced however the Service Methods do not contain a part number to order just the connector.
Applies to
- Models
- Signa
- Product
- Contour 3 & 4
- Software
- Profile Contour 7.67 Applies to Profile1 through 4 and Contour1 through 4. This is the last revision of software for this product line. Requires 7.66 LFC. 7.67 is a patch.
- Component
- 2141426 Cradle Release Assembly for Mobile Contour 2127084-2 Cradle Release Assembly for Fixed Site Contour Tables
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.