GE Healthcare · MRSigna224152022415282241530
System pauses with Z axis Current Distortion Fault.
Symptom
System pauses with Current Distortion Fault Intermittently scans will pause with Z axis Current Distortion Fault, sometimes scan can be resumed and sometimes TPS reset gets scan going again.
Error message
2241520 The GIP reported a Z Axis Current Distortion Fault. Fri Sep 10 10:58:56 2004 Error: 2241520 Host: wb001 Process: NSP File: HPC_PORT_ID:GAP/GIP/GP Line: 2232 The GIP reported a Z Axis Current Distortion Fault. Another fault reported in the log could be the cause of this fault. Possible causes: GRAM Tuning, miniGRAM, component 2241528 % Axis Gradient Overload Occurred the GPM has reported an overload Fri Sep 10 10:58:56 2004 Error: 2241530 Host: wb001 Process: NSP File: HPC_PORT_ID:GAP/GIP/GP Line: 2540 Z Axis Gradient Overload Occurred. The Z Axis of the GPM has reported an overload. An overload is the result of the GPM output voltage not following the input command.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2151183 GRADIENT POWER MODULE For SGD. 8651 Is SGD Hi-Slew Gradient Power Module.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.