During DSX/DS7 boot up process a "Timeout during reading characters from gantry" message is displayed
Symptom
During DSX/DS7 boot up process a "Timeout during reading characters from gantry" message is displayed During DSX/DS7 boot up process a "Timeout during reading characters from gantry" message is displayed. You apply power to the system and hear the four beeps. The operator types go-app, then go. During the boot up process, you do not hear the four beeps coming from the hand control. You may also see the message Timeout reading characters from Gantry displayed on the dialog monitor. This indicates the Process Board is not talking with the FLOG Board.
Error message
Error message Timeout during reading characters from gantry. Check the connection Error message Timeout during reading characters from gantry. Check the connection.
Applies to
- Product
- SMV DS Camera SMV DS Camera SMV DS Camera
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Muga patch FMI 40788 when loaded does not indicate it completed
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Part number needed for Optima E-Stop
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- Need part numbers for the Millennium MG/MC table E-Stop