GE Healthcare · Nuclear MedicineMillennium
How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station…
How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
Symptom
How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR Customer wants to print Genieacq Quality Control (QC) screens.
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT MPR/MPS Millennium MPR Millennium MPS
- Software
- GenieAcq R4.5 V14 (M4) Genieacq 4.5 Build 14 (M4) 5220379 Genieacq SW R4.5 V014 M4 with accumulative patches GA450-05-1, GA450-6-1, GA450-07-0, GA450-08-1, and GA450-09-0 for Spare Part GENIE Acq R 4.5 V014 supports EDI and I/N board hardware configurations. The following computer platforms are supported by this version: SuperMicro P4SBR ( only supports the EDI detctor, reference SN43628 ) IBM x205 Dell 1400SC Dell GX200 Dell 1300. Dell 2200 and Intel AltServer are not supported. Reference CIS 5150522-100_r2 Genieacq R4.6 V004 + Patch GA460-01-0 Genieacq R4.6 V004 + Patch GA460-01-0 5394015 - GenieAcq SW Pkg. R4.6 V004 with patch GA460-01-0 GenieAcq SW Version 4.6 is not valid for systems with I/N boards , and it does NOT support DELL2200, Altserver and Dell 1300. Genieacq 4.0 Genieacq 4.0
- Component
- *Accreditation ACR NEMA ICANL * Accreditation National Electrical Manufacturers Association (NEMA) American College of Radiology (ACR) Intersocietal Commission for the Accreditation of Nuclear Medicine Laboratories (ICANL) GE ACR SupportCentral site http://supportcentral.ge.com/products/sup_products.asp?prod_id=62422 ACR NM Accreditatin Service Perspective Training http://libraries.ge.com/foldersIndex.do?entity_id=14553626101&sid=101&SF=1 American College of Radiology (ACR) Website (Nuclear Medicine and PET) http://acr.org/accreditation/nuclear.aspx *Printer Printer Printer
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size
- Service Tool - NM Phantom Carrying Case part numbers