GE Healthcare · MR2249631
CWA ID89625. Auto Prescan Fails With Could Not Set the Z2 Shim.
Symptom
Auto Prescan Fails With Could Not Set the Z2 Shim When running auto prescan, an error message appears and is logged "Could not set the Z2 Shim".
Error message
2249631 Z2 GEMXserv ERROR Z2 current monitoring has detected out-of-tolerance output on the channel. Error: 2249631 Host: KRMR Process: port_mgr File: PMMain.cc Line: 999 Z2 GEMXserv ERROR Z2 current monitoring has detected out-of-tolerance output on the channel. Possible faulty cabling, NAV XCVR, shim supply or coil. ** Image quality degradation is possible. **
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.