GE Healthcare · MRSigna
Images on the films off the Kodak Dryview are very small, approxamately 1 inch by 1 inch.
Symptom
Images on the films of the Kodak Dry View are very small, approximately 1 inch by 1 inch. No matter what matrix is selected in the film composer. LX system With 9.1 M4 Software is connected to a Kodak Dry View through a digital DASM. When printing images, they come out very small on the film, approximately 1 inch by 1 inch no matter what the matrix selected is. Sounds like the film is set up in slide mode.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.