GE Healthcare · MRSigna2225750
Defective Analogic RF amplifier.
Symptom
Will Not Scan With RF Errors Will not scan with RF errors
Error message
2225750 Analogic RF Amplifier 1 Voltage Standing Wave Ratio (VSWR) Fault. Analogic RF Amplifier 1 reflected power exceeds 2250W. Possible causes: disconnected or defective output cable from RF Amplifier 1 to RF Interface (RFI), Error: 2225750 Host: MR01_OW1 Process: NSP File: HPC_PORT_ID:spi_rf_mon Line: 3066 Analogic RF Amplifier 1 Voltage Standing Wave Ratio (VSWR) Fault. Analogic RF Amplifier 1 reflected power exceeds 2250W. Possible causes: disconnected or defective output cable from RF Amplifier 1 to RF Interface (RFI), de
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.