GE Healthcare · MRSigna
Low Resolution on Auto Viewer and Browser Due to Gamma Lookup Table.
Symptom
How to Save Gamma Permanent Setting For 9.1, so That After Rebooting The Value Will Not Change The FE upgraded its system to 9.1 Software. The doctor did not like the LUT (look up table) provided with the software; therefore the FE decided to change to 1.05. He made this modification by typing the command "gamma 1.05". After rebooting the gamma value 1.05 was not saved. The customer wanted a permanent modification of this value.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.