MG-MC-Myosight intermittent operation of the VG lock assembly.
Symptom
MG-MC-Myosight intermittent operation of the VG lock assembly. The operation fails while going from lock to unlock or from unlock to lock. Sometimes resetting the gantry will correct the problem. If a reset does not correct the issue the lock must be manually operated to the lock position with an external battery attached to the motor leads. MG-MC-Myosight intermittent operation of the VG lock assembly. The operation fails while going from lock to unlock or from unlock to lock. Sometimes resetting the gantry will correct the problem. If a reset does not correct the issue the lock must be manually operated to the lock position with an external battery attached to the motor leads.
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Component
- *Gantry Gantry Gantry
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size