GE Healthcare · Nuclear MedicineMillennium
VG, the contour works... but in the opposite way.
Symptom
VG, the contour works... but in the opposite way. Head 2 is reacting to the body contour signal from Head 1. This means if you interrupt the Head 1 body contour sensor, Head 1 does not change the direction of the movement as expected, but still continues to move in the same direction. However , Head 2 starts to move in the opposite direction so Head 2 is reacting to the body contour signal of Head 1. Source Domingo Rosano
Applies to
- Models
- Millennium
- Product
- VGH VG and VG Hawkey and Varicam
- Component
- *Detector (Imaging Detector) *Detector (Imaging Detector) *Detector (Imaging Detector)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size
- Service Tool - NM Phantom Carrying Case part numbers