GE Healthcare · MRSigna
Cannot Enter Patient Name In the Patient Information Field Due to Cursor was Still in the Patient ID field.
Symptom
Cannot Enter Patient Name In the Patient Information Field from Worklist The new patient information could be entered except for the patient name. After the patient id was entered then the cursor would not go into the patient name field (neither starting to far left or far right). The tech was able to reboot several times for several patients and appeared to luckily enter the patient name. Tech did not have any idea of what they had done differently to be successful to enter the patient name or preventing the system to enter the patient name.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.