GE Healthcare · Nuclear Medicine
Ventri system, no counts or image on detector when setup for acquisition.
Symptom
Ventri system, no counts or image on detector when setup for acquisition.
Error message
Adam Test failure :Analog Window calculated energy is out of nominal bounds : Could not create analog energy window Log from Adam test diaganostic with errors- Adam Test failure- 09:07:21 Testing detector # 2 09:07:27 Calculated start DC slide for Analog Window: 0x750 09:07:27 Calculated end DC slide for Analog Window: 0x7f0 09:07:27 Calculated G0 for analog channel: 0x712 09:07:27 Calculated Energy for Analog Window: 0x7b2 27/07/07 09:07:27 Analog Window calculated energy is out of nominal bounds - Min: 0x300, Max: 0x500 09:07:27 Forcing Enr value to 0x400 09:07:27 Could not create analog energy window
Applies to
- Product
- Ventri Ventri Ventri
- Component
- UGP500114 (5272330) ADAM Board (Ventri, Infinia, VG) FE Assist: If PCA000464 or UGP500114 are not available order # 5272330 UGP500114 (5272330) ADAM Board (Ventri, Infinia, VG) FE Assist: If PCA000464 or UGP500114 are not available order # 5272330 *Detector (Imaging Detector) *Detector (Imaging Detector) *Detector (Imaging Detector)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Muga patch FMI 40788 when loaded does not indicate it completed
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Part number needed for Optima E-Stop
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- Need part numbers for the Millennium MG/MC table E-Stop