GE Healthcare · Nuclear MedicineMillennium
When Millennium table was retracked it would hit the end limit switch and give Error table longitudinal axis on forward…
When Millennium table was retracked it would hit the end limit switch and give Error table longitudinal axis on forward limit.
Symptom
When Millennium table was retracked it would hit the end limit switch and give Error table longitudinal axis on forward limit. FE tried to re-characterize longitudinal axis and would get the same error.
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT MPR/MPS Millennium MPR Millennium MPS
- Software
- Genieacq All Genieacq All Genieacq All
- Component
- *Patient Table *Patient Table *Patient Table
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size