GE Healthcare · Nuclear Medicine
Starcam Polestar Computer console not booting up, no power indication at console, gantry does have power.
Symptom
Starcam Polestar Computer console not booting up, no power indication at console, gantry does have power. When turn main power switch on, gantry power comes on but computer has no indication of power, no fans console turn on, monitors blank and reset led is not on. Starcam Polestar Computer console not booting up, no power indication at console, gantry does have power. When turn main power switch on, gantry power comes on but computer has no indication of power, no fans console turn on, monitors blank and reset led is not on.
Applies to
- Product
- Starcam Polestar Starcam Polestar product Starcam Polestar product
- Component
- *Computer (Tower, PC) *Computer (Tower, PC) *Computer (Tower, PC)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Muga patch FMI 40788 when loaded does not indicate it completed
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Part number needed for Optima E-Stop
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- Need part numbers for the Millennium MG/MC table E-Stop