GE Healthcare · MR18008
OrthoMRI Foot/Ankle cable coil is broken.
Symptom
OrthoMRI 18008 w: frequency calibration during scout, there is no signal message.
Error message
OrthoMRI 18008 w: frequency calibration during scout, There is no signal OrthoMRI 18008 w: frequency calibration during scout. There is no signal.
Applies to
- Product
- OrthoMRI Escan XQ EscanXQ and EscanNE
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Component
- OrthoMRI P/N LNR8800031002 CABLE FOR FOOT/ANKLE COIL. OrthoMRI P/N LNR8800031002 CABLE FOR FOOT/ANKLE COIL. There is a PSDB solution available for deselecting the automatic coil recognition for ALL OrthoMRI systems. If need be, follow that resolution. Then the system can be used as normal once the operator manually selects which coil is being used while on the patient set up page. The most common failure is the particular coil's cable. If multiple coils have this issue the fix could be the mechanical swing arm.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.