GE Healthcare · MRSigna
System Monitor stops operation with one of the following conditions
Symptom
System Monitor stops operation with one of the following conditions: 'P050' (or nothing) is shown in 7Seg LED display on System Monitor SMILe 6/27/07 Effectivity: Signa Contour with SYSTEM MONITOR BOX (2204299-3) Problem: After system power on, there is a possibility that System Monitor stops it's operation with one of the following conditions. • 'P050' is shown in 7Seg LED display on System Monitor • Nothing is shown in 7Seg LED display. (See Resolution Concept for the complete SMILe released 6/27/07)
Error message
P050 This is shown in 7Seg LED display on System Monitor.
Applies to
- Models
- Signa
- Product
- Contour 3 & 4
- Software
- 7.7x Profile3 through 4, Contour3 through 4
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.