Need instructions for routing Ventri cable CBL500170 from Norav ECG unit to connect to cable CBL500171 inside the stator…
Need instructions for routing Ventri cable CBL500170 from Norav ECG unit to connect to cable CBL500171 inside the stator.
Symptom
Need instructions for routing Ventri cable CBL500170 from Norav ECG unit to connect to cable CBL500171 inside the stator. The Ventri Installation Manual (Direction 2414306-100, Rev. 3) does not include instructions or illustrations for routing cable CBL500170. This is the interconnecting cable between the Norav ECG unit and cable CBL500171. The connection between CBL500170 and CBL500171 is made inside the Ventri stator.
Applies to
- Product
- Ventri Ventri Ventri
- Component
- *Gantry Gantry Gantry CBL500170 Ventri Cable ECG NORAV-STATOR CBL500170 Ventri Cable ECG NORAV-STATOR CBL500170 Ventri Cable ECG NORAV-STATOR
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Muga patch FMI 40788 when loaded does not indicate it completed
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Part number needed for Optima E-Stop
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- Need part numbers for the Millennium MG/MC table E-Stop